Twin Rotor Slasher
The Kanga farm equipment Twin Rotor Slashers are purpose-built to suit tractors ranging from 50 to 90 horsepower, delivering outstanding performance across a wide range of applications. With a folded and fully reinforced deck design, hot-dip galvanization and a compact profile, these slashers combine a wide cut width with exceptional maneuverability.
Designed and manufactured in Australia to withstand the rugged Australian conditions, our slashers are equipped with a combination of gearboxes and heavy-duty spring cushioned couplings. This ensures reliable operation and allows the machine to handle material up to 50mm thick.
Features
6mm, square, clean-top deck
- Folded and fully reinforced
- Structural channel chassis
- 10mm side walls
- Clean top reduces the collection of debris and water
Deck side walls are welded and braced for strength when turning
Compact deck design (shorter front to rear) allows us to produce an implement with a wide cut width and increased manoeuvrability
Deck is hot-dip galvanized, for superior corrosion resistance and longevity
Features
6mm, square, clean-top deck
- Folded and fully reinforced
- Structural channel chassis
- 10mm side walls
- Clean top reduces the collection of debris and water
Deck side walls are welded and braced for strength when turning
Compact deck design (shorter front to rear) allows us to produce an implement with a wide cut width and increased manoeuvrability
Deck is hot-dip galvanized, for superior corrosion resistance and longevity
Equipped with lowered Bisalloy oval disc rotors, our Twin Rotor Slashers efficiently discharge large volumes of material without compromising the blade tip speed. This results in fast, clean and dependable mowing performance.
Disc rotors
- Two (2) 12mm BisAlloy oval steel disc
- Lowered, overlapping and timed, bolt-together design
Rounded corners on oval disc rotors and 360° spinning blades reduces impact related shock loads back through the drive train while the larger surface area helps the implement glide over obstacles such as check-banks, rocks and larger debris
Blades
- Stepped, suction, heat-treated spring steel blades pivoting on hardened bushes
- 360° spinning
- Directional, rotating clockwise and anti-clockwise concurrently
- Oversize cup and pin blade bolt fixing system
Skids
- Removeable side skids with tapered leading and trailing edges
- Braced for strength
- Positive-locking with individual slots to maintain height
- Adjustable, four (4) positions (30mm increments)
Cutting heights
50, 80, 110 and 140mm cutting heights
140mm – 300mm cutting height for topping paddocks is achievable using depth wheels
Category 2 and 3 linkage
Two-plate, double clevis mount designed to absorb lateral load and decrease metal fatigue when turning. Multiple mounting holes suit different tractors and quick-hitch systems
Centre-mounted tower position. Both slotted and round top link pin holes provide operators with the option of a floating or rigid tower mounting set-up
To provide a stable cutting platform, twin wheels are fitted to the rear of the deck as a standard feature. These rear wheels can spin 360°, maintaining cut height in both forward and reverse slashing operations.
Depth wheels
- Height adjustment via a greaseable ratchet jack with a lock nut. Lock nut on the ratchet jack maintains cutting height
- 360° spinning wheel fork
- Heavy-duty solid cushion tyre with cast hub assembly
- Reinforced rectangular tube frame
- Nyloc lock nut to set pre-load on load bearing turn table discs
- Grease nipples for turn table discs and fork shaft for easy regular maintenance
Gearbox
The 90hp, 3-way, centre gearbox facilitates the 90° turn of power required for twin rotor cutters
Heavy-duty spring cushion couplings transfer power between the gearboxes, while Danish Value Springs absorb shock loads from blade impact, prolonging the life of gearboxes and the drive line. Shock loads in the middle gearbox are absorbed by an over-run clutch.
PTO
Series 8, 6 spline PTO shaft with 200mm (8”) friction over-run clutch
Lever release PTO Shaft Guards facilitate safe engagement of yokes and easy joint maintenance
Protection
Front and rear chain curtain is incorporated into the deck for maximum safety, with a unique wire rope replacement system
Blade exclusion zone for safety to prevent accidental contact with blades
Waterproof manual holder
Specifications
Code | KMH075 - 1.8 | KMH075 - 2.1 | KMH075 - 2.4 |
|---|---|---|---|
| Size reference | 1.8m | 6’ | 72” | 2.1m | 7’ | 84” | 2.4m | 8’ | 96” |
| Tractor range (hp) | 50-90 | 42-75 @ PTO | 55-90 | 46-75 @ PTO | 60-90 | 50-75 @ PTO |
| Gearbox | 90hp, 540rpm | 90hp, 540rpm | 90hp, 540rpm |
| Blade tip speed (ft/min) | 15,120 | 16,730 | 19,620 |
| Overall width (mm) | 1960 | 2260 | 2560 |
| Cutting width (mm) | 1800 | 2100 | 2400 |
| Weight (kg) | 995 | 1045 | 1095 |
| Price (inc. GST) | $27,500 | $29,000 | $31,000 |
| Price (inc. GST) | $34,616 | $36,504 | $39,021 |
| Price (inc. GST) | $30,250 | $31,900 | $34,100 |
Options
Code | Description | Price (inc. GST) | Price (inc. GST) | Price (inc. GST) |
|---|---|---|---|---|
| KMH-TSD | Twin side discharge modification* | suits all twin rotor slashers | $1,300 | $1,723 | $1,430 |
Farm Implements offers the option to order this implement with twin-side discharge.
This modification discharges the cut material as mulch, laterally under vines or orchard trees.
Side discharge prevents windrows between rows and benefits plantings by suppressing weed growth, top soil erosion and moisture evaporation.
* only available at time of order. Cannot be retro-fitted.
Parts
Code | Description | Price (inc. GST) | Price (inc. GST) | Price (inc. GST) |
|---|---|---|---|---|
| 220.086-S250 | Suction blade | 360° rotation | left | each | suits KMH075-1.8/KMH075-2.1/KMH075-2.4 | $66 | $87 | $66 |
| 220.087-S250 | Suction blade | 360° rotation | right | each | suits KMH075-1.8/KMH075-2.1/KMH075-2.4 | $66 | $87 | $66 |
| 220.086-S360 | Suction blade | 360° rotation | left | each | suits KMH130-2.5/KMH130-3.0/KMH200-3.0 | $80 | $106 | $80 |
| 220.087-S360 | Suction blade | 360° rotation | right | each | suits KMH130-2.5/KMH130-3.0/KMH200-3.0 | $80 | $106 | $80 |
| 100.188 | 7/8 Oval rotor bolt kit | kit (1 x bolt, nut, bush) | each (per blade) | suits all | $99 | $131 | $99 |
Need more information? Contact us here