3PL Pasture Topper

KANGA 3-Point Linkage Pasture Toppers are designed, engineered and manufactured in Australia. This topper has a category 2 and 3 compatible rigid tower that suits tractors 60 to 200hp.

The open-back design of the KANGA 3PL Pasture Topper is fitted with a hydraulically controlled rear flap. When the flap is open the lowered spring steel cutter bars, powered by high-speed gearboxes, evenly discharge the cut material over a wide area.

In situations where there is extensive grazing, stock deteriorates the condition of pasture. Continuing to feed stock on rundown pasture results in a drop in condition and production. The best way to maintain quality, reduce the spread of weeds and increase yields is by regularly topping pasture.

  • Rear anti scalping skid

Models

2.4m (90hp)

Code KT090 - 2.4
Description 2.4m Pasture Topper (90hp)
Construction 6mm, square, folded, 'clean top' deck with structual channel chassis and 10mm side plates
Gearbox 90hp, 540rpm
PTO shaft/clutch Series 8 with 200mm (8") friction (slip) clutch
Skids Adjustable, positive locking, four (4) positions (30mm increments)
Cutter bar Lowered, bolt together, 100mm spring steel
Blades Heat treated, spring steel clockwise and anti-clockwise on hardened bushes
Linkage/mounting Double clevis, category 2 and 3
Tower position(s) Centre mounted
Finish Hot dipped galvanized deck and painted parts
Stone guards Front chains (10mm) incorporated into the deck with hydraulic opening rear rubber guard
Overall width (mm) 2540
Cutting width (mm) 2340
Cutting height (mm) 50 - 140
Tractor range (hp) 60 - 90
Blade tip speed (ft/min) 19,620
Weight (kg) 690

3.0m (130hp)

Code KT130 - 3.0
Description 3.0m Pasture Topper (130hp)
Construction 6mm, square, folded, 'clean top' deck with structual channel chassis and 10mm side plates
Gearbox 130hp, 540rpm
PTO shaft/clutch W2600 Series with 200mm (8") friction (slip) clutch
Skids Adjustable, positive locking, four (4) positions (30mm increments)
Cutter bar Lowered, bolt together, 130mm spring steel
Blades Heat treated, spring steel clockwise and anti-clockwise on hardened bushes
Linkage/mounting Double clevis, category 2 and 3
Tower position(s) Centre mounted
Finish Hot dipped galvanized deck and painted parts
Stone guards Front chains (10mm) incorporated into the deck with hydraulic opening rear rubber guard
Overall width (mm) 3190
Cutting width (mm) 2890
Cutting height (mm) 50 - 140
Tractor range (hp) 80 - 130
Blade tip speed (ft/min) 16,560
Weight (kg) 1350

3.0m (200hp)

Code KT200 - 3.0
Description 3.0m Pasture Topper (200hp)
Construction 6mm, square, folded, 'clean top' deck with structual channel chassis and 10mm side plates
Gearbox 200hp, 1000rpm
PTO shaft/clutch W2600 Series with 200mm (8") friction (slip) clutch
Skids Adjustable, positive locking, four (4) positions (30mm increments)
Cutter bar Lowered, bolt together, 130mm spring steel
Blades Heat treated, spring steel clockwise and anti-clockwise on hardened bushes
Linkage/mounting Double clevis, category 2 and 3
Tower position(s) Centre mounted
Finish Hot dipped galvanized deck and painted parts
Stone guards Front chains (10mm) incorporated into the deck with hydraulic opening rear rubber guard
Overall width (mm) 3190
Cutting width (mm) 2890
Cutting height (mm) 50 - 140
Tractor range (hp) 80 - 200
Blade tip speed (ft/min) 15,710
Weight (kg) 1350

Parts

220.086 KANGA left hand (anti-clockwise) blade (per blade)
220.087 KANGA right hand (clockwise) blade (per blade)
100.135 KANGA 3/4” blade bolt kit (for two (2) blades)