S Range Rotary Cutter

KANGA S Range Rotary Cutters are general-purpose implements designed for tough Australian conditions.

The hot-dipped galvanized deck is fully reinforced for strength. Front and rear incorporated safety chains come standard, for maximum safety.

The lowered high tensile cutter bar on the KANGA S Range Rotary Cutters allow a higher volume of material to be easily discharged producing fast, clean, dependable cutting in light scrub, regrowth and long grass.

  • KANGA S Range Rotary Cutter
  • Depth wheel

  • Multi mount sliding tower

  • Blade bolt inspection cap

  • Rotary cutter blade exclusion zone

  • Waterproof manual holder

Models

1.2M

Code
KSSR120
DescriptionS1200 Rotary Cutter
Construction3mm, round-back, clean top deck with reinforced subframe
Gearbox40hp, 540rpm, 1:1.93 ratio
PTO shaft/clutchSeries 4 with 150mm (6") friction (slip) clutch
SkidsAdjustable, positive locking, four (4) positions (30mm increments)
Cutter barLowered, bolt together, high tensile/spring steel
BladesStepped, suction, heat-treated, spring steel pivoting on hardened bushes
Linkage/MountingDouble clevis, category 1 and 2
Tower position(s)Multiple - offset (left and right) and centre mounted
FinishHot dipped galvanized deck and painted parts
Stone guardsFront and rear chains (6mm) incorporated into the deck
Overall width (mm)1410
Cutting width (mm)1200
Cutting height (mm)50 - 140
Tractor range (hp)28 - 40
Blade tip speed (ft/min)13,119
Weight (kg)250

1.35M

Code
KSSR135
DescriptionS1350 Rotary Cutter
Construction3mm, round-back, clean top deck with reinforced subframe
Gearbox40hp, 540rpm, 1:1.93 ratio
PTO shaft/clutchSeries 4 with 150mm (6") friction (slip) clutch
SkidsAdjustable, positive locking, four (4) positions (30mm increments)
Cutter barLowered, bolt together, high tensile/spring steel
BladesStepped, suction, heat-treated, spring steel pivoting on hardened bushes
Linkage/MountingDouble clevis, category 1 and 2
Tower position(s)Multiple - offset (left and right) and centre mounted
FinishHot dipped galvanized deck and painted parts
Stone guardsFront and rear chains (6mm) incorporated into the deck
Overall width (mm)1560
Cutting width (mm)1350
Cutting height (mm)50 - 140
Tractor range (hp)35 - 50
Blade tip speed (ft/min)14,760
Weight (kg)280

1.5M

Code
KSSR150
DescriptionS1500 Rotary Cutter
Construction3mm, round-back, clean top deck with reinforced subframe
Gearbox40hp, 540rpm, 1:1.93 ratio
PTO shaft/clutchSeries 4 with 150mm (6") friction (slip) clutch
SkidsAdjustable, positive locking, four (4) positions (30mm increments)
Cutter barLowered, bolt together, high tensile/spring steel
BladesStepped, suction, heat-treated, spring steel pivoting on hardened bushes
Linkage/MountingDouble clevis, category 1 and 2
Tower position(s)Multiple - offset (left and right) and centre mounted
FinishHot dipped galvanized deck and painted parts
Stone guardsFront and rear chains (6mm) incorporated into the deck
Overall width (mm)1710
Cutting width (mm)1500
Cutting height (mm)50 - 140
Tractor range (hp)40 - 50
Blade tip speed (ft/min)16,400
Weight (kg)300

Options

KSRDW KANGA light duty depth wheel

Parts

100.134 KANGA stepped suction blades (pair)
100.135 KANGA 3/4” blade bolt kit
100.136 KANGA 7/8” blade bolt kit (suit cutters pre-2008)