Trailing Pasture Topper

KANGA Trailing Pasture Toppers are designed, engineered and manufactured in Australia for fast, clean, dependable topping of pasture.

Providing professional farmers with a trailing option, this topper comes standard with hydraulic height control (front and rear), large pneumatic wheels, a wide-angle power take-off shaft and is suitable for tractors 90 to 200hp.

The body of the KANGA Trailing Pasture Topper is formed and folded, then fully reinforced with structural channel. The open back deck is fitted with a manually controlled rear flap. When the flap is open the lowered spring steel cutter bars, powered by high-speed gearboxes, evenly discharge the cut material.

This implement is ideal for maintaining quality, reducing the spread of weeds and increasing yields on dairy, beef and sheep operations.

Models

3.0m (130hp)

Code KTT130 - 3.0
Description 3.0m Trailing Pasture Topper (130hp)
Construction 6mm, square, folded, 'clean top' deck with structual channel chassis and 10mm side plates
Gearbox 130hp, 540rpm
PTO shaft/clutch W2600 Series with 200mm (8") friction (slip) clutch
Skids Adjustable, positive locking, four (4) positions (30mm increments)
Cutter bar Lowered, bolt together, 130mm spring steel
Blades Heat treated, spring steel clockwise and anti-clockwise on hardened bushes
Linkage/mounting Tow hitch/drawbar with hydraulic height control
Mounting position Centre mounted
Finish High build primer and equipment enamel top coat
Stone guards Front chains (8mm) incorporated into the deck with manual opening rear rubber guard
Wheels Hydraulic height adjustable, pneumatic (15-9.00) 'highway' implement tyres
Overall width (mm) 3190
Cutting width (mm) 2890
Cutting height (mm) 50 - 300 (max. 140 on the skids)
Tractor range (hp) 80 - 130
Blade tip speed (ft/min) 16,560
Weight (kg) 1500

3.0m (200hp)

Code KTT200 - 3.0
Description 3.0m Trailing Pasture Topper (200hp)
Construction 6mm, square, folded, 'clean top' deck with structual channel chassis and 10mm side plates
Gearbox 200hp, 1000rpm
PTO shaft/clutch W2600 Series with 200mm (8") friction (slip) clutch
Skids Adjustable, positive locking, four (4) positions (30mm increments)
Cutter bar Lowered, bolt together, 130mm spring steel
Blades Heat treated, spring steel clockwise and anti-clockwise on hardened bushes
Linkage/mounting Tow hitch/drawbar with hydraulic height control
Mounting position Centre mounted
Finish High build primer and equipment enamel top coat
Stone guards Front chains (8mm) incorporated into the deck with manual opening rear rubber guard
Wheels Hydraulic height adjustable, pneumatic (15-9.00) 'highway' implement tyres
Overall width (mm) 3190
Cutting width (mm) 2890
Cutting height (mm) 50 - 300 (max. 140 on the skids)
Tractor range (hp) 80 - 200
Blade tip speed (ft/min) 15,710
Weight (kg) 1500

3.6m (200hp)

Code KTT200 - 3.6
Description 3.6m Trailing Pasture Topper (200hp)
Construction 6mm, square, folded, 'clean top' deck with structual channel chassis and 10mm side plates
Gearbox 200hp, 1000rpm
PTO shaft/clutch W2600 Series with 200mm (8") friction (slip) clutch
Skids Adjustable, positive locking, four (4) positions (30mm increments)
Cutter bar Lowered, bolt together, 130mm spring steel
Blades Heat treated, spring steel clockwise and anti-clockwise on hardened bushes
Linkage/mounting Tow hitch/drawbar with hydraulic height control
Mounting position Centre mounted
Finish High build primer and equipment enamel top coat
Stone guards Front chains (8mm) incorporated into the deck with manual opening rear rubber guard
Wheels Hydraulic height adjustable, pneumatic (15-9.00) 'highway' implement tyres
Overall width (mm) 3800
Cutting width (mm) 3500
Cutting height (mm) 50 - 300 (max. 140 on the skids)
Tractor range (hp) 100 - 200
Blade tip speed (ft/min) 18,850
Weight (kg) 1650

Parts

220.086 KANGA left hand (anti-clockwise) blade (per blade)
220.087 KANGA right hand (clockwise) blade (per blade)
100.135 KANGA 3/4” blade bolt kit (for two (2) blades)