XH Range Grader Blade
Made in Australia, KANGA XH Range Grader Blades are an extra heavy-duty blade with full hydraulic movement, engineered to suit tractors 75 to 130hp.
The operator can hydraulically adjust the blade to move material side to side, offset the blade to grade in hard to reach areas and tilt the blade to create a slope or for drain cutting and management.
The KANGA XH Grader Blade can also be set up with the blade reversed and the hydraulic rams on the internal side. This allows the operator to back blade, clearing scrub and debris with less chance of damaging hydraulic rams, hoses and tractor tyres.
The KANGA XH Range has undergone extensive field testing in harsh Australian conditions; creating and maintaining dirt roads, firebreaks and drains, clearing dense scrub and heavy-duty grading and scraping.
Features
Main beam
- Single, 1,500mm long piece of square 150 x 150 x 9mm Box Section provides greater strength
- The front mounting plate is reinforced for greater structural integrity
- Adjustment mounting lugs reinforced and/or gusseted so you can reposition the blade while operating
Blade mouldboard
- Reinforced and gusseted 10mm rear blade section
- Involuted design to ensure a high volume of material clears from the blade as the operator is working
- The blade is designed to be reversed 180° for back blading (pushing backwards)
- 650mm ground clearance
All three blade adjustments pivot points are bushed and/or reinforced with external grease nipples for easy lubrication
Features
Main beam
- Single, 1,500mm long piece of square 150 x 150 x 9mm Box Section provides greater strength
- The front mounting plate is reinforced for greater structural integrity
- Adjustment mounting lugs reinforced and/or gusseted so you can reposition the blade while operating
Blade mouldboard
- Reinforced and gusseted 10mm rear blade section
- Involuted design to ensure a high volume of material clears from the blade as the operator is working
- The blade is designed to be reversed 180° for back blading (pushing backwards)
- 650mm ground clearance
All three blade adjustments pivot points are bushed and/or reinforced with external grease nipples for easy lubrication
The cutting edges are:
- 150 x 12mm with countersunk bolt holes
- Heat-treated, through-hardened, quenched and tempered alloy steel
- Hardness ratings between 450-510
- Centre-line drilled making them reversible
- Secured with high-tensile plough bolts
The main beam positions the majority of the implement weight over the cutting edge reducing blade ‘bounce’ leaving a smooth level finish
3-way hydraulic adjustment with external grease points
Adjustments are made using 4″ hydraulic cylinders with 1/2″ hoses and fitting
Angle adjustment
Angle adjustment controls the blade section and cutting edge on the horizontal plane. It controls the lateral movement of material
Angle adjustment range: 0° – 30° forwards and backwards
Tilt adjustment
Tilt adjustment controls the blade section and cutting edge on the vertical plane. It is used for creating a camber or slight angle to the ground surface. At the maximum, it can be used to establish and maintain a ditch or drain
Tilt adjustment range: 0° – 30° up and down
Offset adjustment
Offset adjustment controls the position of the blade section and cutting edge in relation to the middle point of the tractor. It is used to move the blade and cutting edge out to the sides left and right of centre. It’s great for those hard-to-reach places and when the tractor just cannot quite get close enough or does not want to.
Offset adjustment range: 0° – 20° left and right
Centre mounted tower position
Two (2) front parking stands to make connecting to the tractor easier
Wide, Category 2 and 3, double clevis linkage/mounting
Specifications
Code | KBXH240 | KBXH300 |
|---|---|---|
| Size reference | 2.4m | 8’0” | 3.0m | 10’0” |
| Tractor range (hp) | 75-130 | 63-109 @ PTO | 90-130 | 75-109 @ PTO |
| Overall width (mm) | 2400 | 3000 |
| Weight (kg) | 630 | 720 |
| Price (inc. GST) | $14,000 | $15,000 |
| Price (inc. GST) | $17,623 | $18,881 |
| Price (inc. GST) | $15,400 | $16,500 |
Options
Code | Description | Price (inc. GST) | Price (inc. GST) | Price (inc. GST) |
|---|---|---|---|---|
| KBXHDWM | Manual depth wheel | suits all | $1,400 | $1,762 | $1,540 |
| KBXHDWH | Hydraulic depth wheel | suits all | $1,900 | $2,392 | $2,090 |
| KBXHDV | Diverter valve system | suits all XH Range | $1,600 | $2,014 | $1,760 |
Need more information? Contact us here