Pasture Topper
Kanga farm equipment Pasture Toppers are meticulously designed, engineered and manufactured in Australia to meet the highest standards. These toppers are suited to tractors ranging from 60 to 200 horsepower.
With two cutting widths, our Pasture Toppers feature robust construction and high-quality components. Investing in the KANGA Pasture Topper means investing in the longevity and productivity of your pasture. With its superior design and Australian manufacturing excellence, this implement provides the reliability and performance needed to optimise your farming operations and achieve desirable results.
Features
The open-back design of our Pasture Topper is equipped with a hydraulically controlled rear door. When the door is open, the lowered Bisalloy oval disc rotors, powered by high-speed gearboxes, discharge the cut material over a wide area. This ensures efficient and effective pasture management, contributing to improved grazing conditions.
6mm, square, clean-top deck with high, open back
- Folded and fully reinforced
- Structural channel chassis
- 10mm side walls
- Clean top reduces the collection of debris and water
Deck side walls are welded and braced for strength when turning
Compact deck design (shorter front to rear) allows us to produce an implement with a wide cut width and increased manoeuvrability
Deck is hot-dip galvanized, for superior corrosion resistance and longevity
Features
The open-back design of our Pasture Topper is equipped with a hydraulically controlled rear door. When the door is open, the lowered Bisalloy oval disc rotors, powered by high-speed gearboxes, discharge the cut material over a wide area. This ensures efficient and effective pasture management, contributing to improved grazing conditions.
6mm, square, clean-top deck with high, open back
- Folded and fully reinforced
- Structural channel chassis
- 10mm side walls
- Clean top reduces the collection of debris and water
Deck side walls are welded and braced for strength when turning
Compact deck design (shorter front to rear) allows us to produce an implement with a wide cut width and increased manoeuvrability
Deck is hot-dip galvanized, for superior corrosion resistance and longevity
Rounded corners on oval disc rotors and 360° spinning blades reduces impact related shock loads back through the drive train while the larger surface area helps the implement glide over obstacles such as check-banks, rocks and larger debris.
Disc rotors
- Two (2) 12mm Bisalloy oval steel disc
- Lowered, overlapping and timed, bolt together design
Blades
- Stepped, suction, heat-treated, spring steel blades pivoting on hardened bushes
- 360° spinning
- Directional, rotating clockwise and anti-clockwise concurrently
- Oversize cup and pin blade bolt fixing system
Skids
- Removable with tapered leading and trailing edges
- Braced for strength
- Positive-locking with individual slots to maintain height
- Adjustable, four (4) positions (30mm increments)
Anti-scalping skid
When cutting with wide implements uneven ground and objects like check banks can cause blades to make contact with the ground. Blade contact at ground level is referred to as scalping, kills grass and creates excessive load on the gearboxes and couplings. The anti-scalping skid adds a central connection point that assists to maintain cutting height, minimise blade impact and reduce scalping.
- Positive-locking with individual slots to maintain height
- Adjustable, four (4) positions (30mm increments)
Cutting heights
50, 80, 110 and 140mm cutting heights
Category 2 and 3 linkage
Two-plate, double clevis mount designed to absorb lateral load and decrease metal fatigue when turning. Multiple mounting holes suit different tractors and quick-hitch systems
Centre-mounted tower position. Both slotted and round top link pin holes provide operators with the option of a floating or rigid tower mounting set-up
Gearbox
The 3-way centre gearbox facilitates the 90° turn of power required for twin-rotor cutters
Heavy-duty spring cushion couplings with a PTO shaft transfer power between the gearboxes, while Danish Value Springs absorb shock loads from blade impact, prolonging the life of gearboxes and the drive line. Shock loads in the middle gearbox are absorbed
by an over-run clutch.
PTO
Series 8, or Series W2600, PTO shaft with 200mm (8”) friction over-run clutch
Lever release PTO Shaft Guards facilitate safe engagement of yokes and easy joint maintenance
Protection
Front chain curtain is incorporated into the deck for maximum safety, with a unique wire rope replacement system
Hydraulically adjustable rear guard with 8mm rubber flap for convenient and safe operation from the tractor seat
Blade exclusion zone for safety to prevent accidental contact with blades
Waterproof manual holder
Specifications
Code | KT090 - 2.4 | KT130 - 3.0 | KT200 - 3.0 |
|---|---|---|---|
| Size reference | 2.4m | 8’ | 3.0m | 10’ | 3.0m | 10’ |
| Tractor range (hp) | 60-90 | 50-75 @ PTO | 80-130 | 67-109 @ PTO | 80-200 | 67-167 @ PTO |
| Gearbox | 90hp, 540rpm | 130hp, 540rpm | 200hp, 1000rpm |
| Blade tip speed (ft/min) | 19,620 | 16,560 | 15,710 |
| Overall width (mm) | 2540 | 3190 | 3190 |
| Cutting width (mm) | 2340 | 2890 | 2890 |
| Weight (kg) | 970 | 1,350 | 1,350 |
| Price (inc. GST) | $30,000 | $32,000 | $32,000 |
| Price (inc. GST) | $37,763 | $40,280 | $40,280 |
| Price (inc. GST) | $33,000 | $35,200 | $35,200 |
Parts
Code | Description | Price (inc. GST) | Price (inc. GST) | Price (inc. GST) |
|---|---|---|---|---|
| 220.086-S250 | Suction blade | 360° rotation | left | each | suits KT090-2.4 | $66 | $87 | $66 |
| 220.087-S250 | Suction blade | 360° rotation | right | each | suits KT090-2.4 | $66 | $87 | $66 |
| 220.086-S360 | Suction blade | 360° rotation | left | each | suits KT130-3.0 & KT200-3.0 | $80 | $106 | $80 |
| 220.087-S360 | Suction blade | 360° rotation | right | each | suits KT130-3.0 & KT200-3.0 | $80 | $106 | $80 |
| 100.188 | 7/8 Oval rotor bolt kit | kit (1 x bolt, nut, bush) | each (per blade) | suits all | $99 | $131 | $99 |
Need more information? Contact us here