Landscape Rake
The KANGA Landscape Rakes will handle tough clean-up jobs like removing debris, gravel and brush to fine raking jobs such as light-duty lawn care and smoothing an area for planting.
KANGA’s design offers both angle, offset and tilt capabilities to meet specific landscape requirements on uneven or undulating ground. A 360-degree pivot allows the operator to control the flow of material to left, right or centre.
Features
Square 100 x 100mm Box Section main beam provides greater strength
Reinforced angle rear rake section
Braced 12mm turn tables where rake sections joins the tower section
Powder-coated finish
Features
Square 100 x 100mm Box Section main beam provides greater strength
Reinforced angle rear rake section
Braced 12mm turn tables where rake sections joins the tower section
Powder-coated finish
25 x 6mm high tensile spring steel
30mm spacings between tines
400mm ground clearance
Quick change bolt-in replacement system
Tine stiffeners to provide additional strength
Angle adjustment
Angle adjustment controls the rake on the horizontal plane. It controls the lateral movement of material
A clamp shaped locking clamp, geared disc and a ‘wingnut’ result in 28 positions over 360°
Offset adjustment
Offset adjustment controls the position of the blade section and cutting edge in relation to the middle point of the tractor. It is used to move the rake out to the sides left and right of centre.
A locking bar and a series of holes down each side on the main frame result in 6 offset positions – 3 left and 3 right
This adjustment is great for those hard-to-reach places and when the tractor cannot quite get close enough or the operator does not want to
Tilt adjustment
Tilt adjustment controls the rakes on the vertical plane. It is used for uneven ground
There a multiple lower linkage pin mounting holes. By using different holes on each side, you make one side of the rake higher or lower than the other
Centre mounted tower position
Front parking stand to make connecting to the tractor easier
Category 1 double clevis linkage/mounting
Specifications
Code | KLSR150 | KLSR210 |
|---|---|---|
| Size reference | 1.5m | 5’0” | 60” | 2.1m | 7’0” | 84” |
| Tractor range (hp) | 15-50 | 30-50 |
| Overall width (mm) | 1500 | 2100 |
| No. of blades | 30 | 42 |
| Weight (kg) | 136 | 160 |
| Price (inc. GST) | $2,450 | $2,750 |
| Price (inc. GST) | $3,084 | $3,462 |
| Price (inc. GST) | $2,695 | $3,025 |
Need more information? Contact us here