H Range Rotary Cutter | Disc Rotor
Since 1983, the Kanga farm equipment H Range Rotary Cutters have been trusted and recommended by our dealers, establishing a reputation as reliable, robust, and high-performing machines. Designed to handle challenging Australian conditions, the H Range is well suited to a diverse range of applications. Whether it’s farmers clearing thick scrub and regrowth or contractors cutting roadsides and maintaining mining sites or government land, these cutters deliver exceptional performance in any task.
The 5mm deck of our H Range Rotary Cutters is fully reinforced underneath, featuring a clean-top design that minimises debris and water collection, ensuring longevity and uninterrupted operation even in harsh environments.
For when the heavy-duty H Range with cutter bar is not enough… we now have the stump jumper…
Features
5mm, round-back, clean-top deck
- Round-back design increases maneuverability
- Clean top reduces the collection of debris and water
Deck side walls are welded and braced for strength when turning
Gearbox mounting plate is welded to the subframe, creating greater structural integrity, in the event of load torque caused by blade impact
Deck is hot-dip galvanized, for superior corrosion resistance and longevity
Features
5mm, round-back, clean-top deck
- Round-back design increases maneuverability
- Clean top reduces the collection of debris and water
Deck side walls are welded and braced for strength when turning
Gearbox mounting plate is welded to the subframe, creating greater structural integrity, in the event of load torque caused by blade impact
Deck is hot-dip galvanized, for superior corrosion resistance and longevity
Three-blade Disc Rotor
The round Three-blade Disc Rotor option takes it to the next level for those facing obstacles such as stumps, rocks and debris. This configuration, often referred to as a stump jumper, provides a larger surface area to navigate obstacles smoothly.
Equipped with three spinning blades that cover a 360° area, the 50% increase in blade surface produces a superior finish. Contractors across the country are increasingly choosing our H Range Rotary Cutter with Disc Rotor for their slashing needs. From the lush Daintree in Far North Queensland, to Cann River in Eastern Victoria and the vast landscapes of Esperance in Western Australia, KANGA proves its reliability and performance.
- Lowered, bolt-together round disc rotor (Bisalloy)
Blades
Countersunk bolts secure the blades, preventing wear and tear and facilitating easy maintenance. Simply unfasten the lock nut to replace blades during the implement’s lifetime.
- Stepped, suction, heat-treated spring steel blades pivoting on hardened bushes
- 360° spinning
Skids
- Reversible, removable side skids with tapered leading and trailing edges
- Braced for strength
- Positive-locking with individual bolt holes to maintain height
- Adjustable, four (4) positions (30mm increments)
Cutting height
50, 80, 110 and 140mm cutting heights
Category 1 and 2 linkage
Two-plate, double clevis mount designed to absorb lateral load and decrease metal fatigue when turning
Tower chain mounting points are welded to the subframe and braced on the deck
Chain stays allow for tower movement, forward and aft, to maintain an even cut over undulating ground
Tower adjustment
- Multiple tower positions; in the centre-mounted position the implement is directly behind the tractor. In the offset position, the implement extends out left or right.
- Tower position can be adjusted without the need of tools thanks to the chain tube holder and sliding tower bar
- Tower is held in position with shaft locking pins
PTO
Series 8 Integral clutch & shaft or Series W2600 Integral clutch & shaft
Lever release PTO Shaft Guards facilitate safe engagement of yokes and easy joint maintenance
Protection
Front and rear chain curtain is incorporated into the deck for maximum safety, with a unique wire rope replacement system
Blade exclusion zone for safety to prevent accidental contact with blades
Waterproof manual holder
Specifications
Code | KSHR180-D | KSHR180-XHD | KSHR210-D | KSHR210-XHD |
|---|---|---|---|---|
| Size reference | 1.8m | 6’0” | 72” | 1.8m | 6’0” | 72” | 2.1m | 7’0” | 84” | 2.1m | 7’0” | 84” |
| Tractor range (hp) | 80-120 | 67-100 @ PTO | 80-120 | 67-100 @ PTO | 90-130 | 75-109 @ PTO | 90-130 | 75-109 @ PTO |
| Gearbox | 130hp, 540rpm, 1:1.92 ratio | 130hp, 540rpm, 1:1.92 ratio | 130hp, 540rpm, 1:1.46 ratio | 130hp, 540rpm, 1:1.46 ratio |
| Blade tip speed (ft/min) | 19,560 | 19,560 | 17,370 | 17,370 |
| Overall width (mm) | 2040 | 2040 | 2335 | 2335 |
| Cutting width (mm) | 1800 | 1800 | 2100 | 2100 |
| Weight (kg) | 610 | 620 | 705 | 715 |
| Price (inc. GST) | $14,500 | $15,000 | $15,500 | $16,000 |
| Price (inc. GST) | $15,900 | $16,563 | $17,225 | $17,888 |
| Price (inc. GST) | $15,950 | $16,500 | $17,050 | $17,600 |
Options
Code | Description | Price (inc. GST) | Price (inc. GST) | Price (inc. GST) |
|---|---|---|---|---|
| KHRDW | Heavy-duty depth wheel | each | suits all | $1,250 | $1,259 | $1,375 |
KANGA heavy-duty depth wheel
- 360° spinning wheel fork
- Heavy-duty solid cushion tyre with cast hub assembly
- Reinforced rectangular tube frame
- Nyloc lock nut to set pre-load on load bearing turn table discs
- Grease nipples for turn table discs and fork shaft for easy regular maintenance
Parts
Code | Description | Price (inc. GST) | Price (inc. GST) | Price (inc. GST) |
|---|---|---|---|---|
| 100.181 | Suction blade | 360° rotation | each | suits KSHR180-D & XHD | $80.00 | $106.00 | $80.00 |
| 100.182 | Suction blade | 360° rotation | each | suits KSHR210-D & XHD | $80.00 | $106.00 | $80.00 |
| 100.183 | 1" Oval rotor bolt kit | kit (1 x bolt, nut, bush) | each (per blade) | suits all | $99.00 | $131.00 | $99.00 |
| 100.170 | 1.8m H Range Disc Rotor | disc with 3-blades | suits KSHR180-D & XHD | $4,400.00 | $5,830.00 | $4,400.00 |
| 100.180 | 2.1m H Range Disc Rotor | disc with 3-blades | suits KSHR210-D & XHD | $4,400.00 | $5,830 | $4,400.00 |
Need more information? Contact us here