Home » Products » Post Hole Diggers » Post Hole Digger | Hydraulic
Post Hole Digger | Hydraulic
The KANGA XH Range Post Hole Diggers are a hydraulic assist, down pressure digger engineered for category 2, 3-point linkage tractors that are rated 40 to 100hp.
This post hole digger has been designed so digging, raising and lowering the auger, is done using the 3” hydraulic ram ONLY. See ‘Setup’ for more information
Australian made and sold separately, the double cut augers are 1.2m in length and, ground conditions permitting, result in hole depths of up to 1.1m. Refer to Post Hole Digger Augers for more details.
Features
Heavy-duty, dual-rail frame, fabricated from Rolled Hollow Section (RHS) steel
Fully welded, gusseted and reinforced around load-bearing points
Bushes welded into the arms where the two (2) main parts join and pivot
Powder-coated and/or painted (high build primer and equipment
The frame that connects to the tractor offers:
- Multiple holes for the bolt-on lower linkage pin
- Three (3) position adjustable top link hitch
- Extendable top link pin
- Two (2) parking stands
Category 2, height-adjustable bolt-on pins linkage
KANGA XH Range Post Hole Diggers have been designed to suit most tractors however every tractor is slightly different. For this reason, our digger has:
- Multiple holes to adjust the height of the lower linkage pins
- 3-position adjustable top link hitch, and
- Extendable top link
Using these three features, you will be able to position the implement in the correct position so digging (raising and lowering the auger) is done using the 3” hydraulic ram ONLY. Not the linkage arms of the tractor
In the event the operator forgets to use the ram and uses the tractor linkage instead, shear bolts have been incorporated into the 3-position adjustable top link hitch, as a safeguard against damage
Features
KANGA XH Range Post Hole Diggers have been designed to suit most tractors however every tractor is slightly different. For this reason, our digger has:
- Multiple holes to adjust the height of the lower linkage pins
- 3-position adjustable top link hitch, and
- Extendable top link
Using these three features, you will be able to position the implement in the correct position so digging (raising and lowering the auger) is done using the 3” hydraulic ram ONLY. Not the linkage arms of the tractor
In the event the operator forgets to use the ram and uses the tractor linkage instead, shear bolts have been incorporated into the 3-position adjustable top link hitch, as a safeguard against damage
Specifications
Code | KPHD50-XH | KPHD75-XH |
---|---|---|
Description | 50hp XH Range (hyd. assist) Post Hole Digger | 75hp XH Range (hyd. assist) Post Hole Digger |
Tractor range (hp) | 40-70 | 33-58 @ PTO | 50-100 | 42-84 @ PTO |
Gearbox | 50hp, 540rpm, 3.18:1 reduction ratio | 75hp, 540rpm, 4.1:1 reduction ratio |
PTO shaft/clutch | Series 4 with 150mm (6") 40hp friction clutch | Series 4 with heavy-duty 150mm (6") 80hp friction clutch |
Weight (kg) | 200 | 210 |
Price (inc. GST) | $4,500 | $4,750 |
Price (inc. GST) | $5,009 | $5,247 |
Price (inc. GST) | $4,950 | $5,225 |
Need more information? Contact us here